AWood AR100x50 Wood

AWood AR100x50 Wood

1. Preparation:

• Check installation parts and materials, including AWood WPC slats, accessories such as screws, nails, bolts, fasteners, and necessary tools.
• Determine structure and installation layout, and ensure technical requirements and 2. Design are adhered to.
• Prepare the surface, support frame and assistant:
• Make sure the installation surface is flat, clean and dry.
• Build a solid support frame for the WPC slats, ensuring appropriate separation and bearing capacity (frame distance >= 1200mm)

3. Installing WPC slats:

• Place the AWood WPC slats on the support frame according to the determined layout.
• Use the mounting method recommended by the manufacturer, including using stainless screws, nails or other accessories.
• Make sure the WPC louvers are attached securely and comply with the distances and specifications.

4. Cut and join:

• If necessary, cut the WPC slats to the desired size and shape using the appropriate cutting tool.
• Join WPC slat pieces together if necessary, using recommended attachment methods and ensuring aesthetics and sturdiness.

5. Check and complete:

• Inspect the entire installation process, ensuring its accuracy and meeting technical and design requirements.
• Clean the surface and remove any stains or blemishes from the installation process.
• Recheck mounting and connections, ensuring firmness and safety.
• Hand over and sign to confirm the construction warranty completion date.

Note: that installing AWood WPC louvers may require specific techniques and methods depending on project requirements. Therefore, always refer to the specific installation instructions from the hotline and follow the instructions of experts if necessary.

Advice: join the training course and practice on-the-job construction to become an expert before constructing AWood WPC.

When constructing AWood WPC, here are some important notes that you should consider:

1. Make sure the installation surface is flat, clean and dry. Remove any dirt, grease, or other obstructing materials from the surface before installation
2. Follow installation instructions: Carefully read AWood manufacturer's installation instructions and follow recommended procedures and regulations. This ensures that the resin wood is installed properly and ensures its longevity and performance. Make sure that the laminate is installed properly
3. Insulation and ventilation: For wood plastic composite installations, make sure to provide adequate clearance between the top surface and the bottom surface. This improves ventilation and prevents water accumulation under the surface
4. Mounting Techniques: Use proper mounting techniques to ensure the WPC is attached firmly and stably. This includes using stainless screws, nails or other mounting methods recommended by manufacturer AWood. Make sure the WPC is attached firmly and stably.
5. Do not use harsh tools: Avoid using compression-strength tools or excessive handling when installing WPC. This may cause damage or loss of aesthetics of the product.
6. Requires screwing in a vertical and perpendicular position at 90⁰ and leaving an expansion gap of 3mm - 5mm at each end.
7. Connected to the stainless steel frame inside by electric welding or bolting the connection, you must pre-drill before screwing onto the AWood bar.
8. Weekly maintenance and cleaning: In order for AWood WPC to maintain its best appearance and longevity, perform regular maintenance every 6 months. Clean WPC surfaces by wiping with warm water and mild soap. Limit the use of strong detergents or vigorous scrubbing on the surface.

Note that these notes are general guidelines only. To ensure the best installation and maintenance of AWood WPC, please refer to specific instructions from the manufacturer and consult experts at hotline number: 0913 8888 23

AWood AR100x5 - Wood

WARRANTY: 5 years, For all normal uses. Specialized for outdoors, no stains, easy to clean

1. Warranty period: AWood wood plastic composite (WPC) warranty period: 5 years. You should check this before purchasing the product.
2. Protection against normal use: Warranties generally apply only if the WPC has been used in a normal manner and has not been damaged due to manufacturing defects.
3. Not affected by the environment: Some warranties may not apply if WPC is used in special environments such as steam or harmful chemicals.
4. Surface warranty: Some warranties only apply to WPC defects such as: peeling, discoloration or cracking.
5. Warranty conditions: Warranties often require you to provide detailed information about the product, including purchase invoice and brand information.
6. Exclusion of liability: Warranty may not apply to damages arising from improper use, use of inappropriate chemical colors, or arbitrarily changing the WPC structure.

For hollow bars, there must be stainless steel bristles of appropriate size. Frame distance >= 1200mm

Note: carefully read the manufacturer's specific warranty terms to clearly understand your rights and responsibilities in case something goes wrong.